1 / 5
Lack ENCLOSURE Raisers (10, 20, 30, 40, 50, 60, 70, 80, 100, 120 mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lack ENCLOSURE Raisers to lift the table. With and without tabs to hold glass. (10,20,30,40,50,60,70,80,100,120 mm)
- Rating
- 0 / 5
- Likes
- 54
- Downloads
- 152
- Makes
- 0
- Views
- 1,107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Description
Lack ENCLOSURE Raisers to lift the table. With and without tabs to hold the glass. You can find different height files (both with and without tabs) - 10mm, 20mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, 100mm, 120mm.
How to use it
You will need :
- 4 printed Lack ENCLOSURE Raisers. ( I used Prusament PETG, .20mm speed )
- 16 wood screws ( I used 2.5mm x 15mm )
- Optional - 2mm Plexiglass cut to size
Remove original Lack Enclosure holders that you printed and attached before from the top of the bottom table. Attach 4 printed raisers with 4 screws to each corner on the bottom tabletop (instead of the original Lack Enclosure Holders you removed. You will not need them anymore). Place the top table on top of them. Done
If you printed with tabs, you will need to cut 2mm x 445mm width (5mm for clearance) plexiglass to the desired height (depends on what height you printed your raisers. E.g. for 50mm lift, you will need 2x445x50 plexiglass .