11,715 models
First layer 60x60 mm square with 0.2 mm height 100x100 mm square https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square Print instructions First gcode: PLA Second gcode: PETG
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…
Print approx. €7.18–€8.77 excl. taxPreliminary estimate for one variant
Based on the fantastic spectra cartridge designed by James Tipton, I've modified it to take full cartridges of film and fit a little more snugly, removing the most tricky aspect of reloading my spectra. Required Materials: Conductive…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
Here you will find my designs for the XT30 size and MR30-M . News: 12.03.2025 STEP files available XT60 Male vertikal/ horizontal mount simple and slim design suitable for a wide range of applications To additionally secure the plug in…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
360 degrees protractor Type Protractor Size: 150 x 150 x 1.50mm
Print approx. €1.70–€2.07 excl. taxPreliminary estimate for one variant
The wheel can make one of the joysticks not move all of the way, so if your game supports it you might want to change the controls. You will need a 608 bearing for the wheel. If you are going to print one I recommend the one by zimo .…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET
Hello there! Unfortunately, the centralization of Bitcoin mining continues to increase. But Bitcoin is for everyone! Especially for small people like you and me, Bitcoin offers the opportunity to break out of the system and gain financial…
Print approx. €6.36–€7.77 excl. taxPreliminary estimate for PETGSource material: PET
Wsporniki ułatwiające wypoziomowanie profili płyt kartonowo-gipsowych CD60. W połączeniu z laserem znacznie ułatwiają pracę, zwłaszcza w pojedynkę. I used ready-made M5 bolts and M5 nuts. Or you can use regular M5x20 screws and print…
Print approx. €2.11–€2.57 excl. taxPreliminary estimate for PETGSource material: PET
This Magic the Gathering Case is made to store sleeved cards. It holds a 60+5 cards deck. Some different styles of the Topcases are provided to enable multicolor prints that doesn´t need the usage of a MMU. It still contains a blank Top…
Print approx. €6.86–€8.38 excl. taxPreliminary estimate for one variant
I was annoyed that my Festool vacuum cleaner has no clip for the cable. So I designed this cable holder in Fusion360 and printed it on my MK3S+. I use PETG for it and 30% infill.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
No support necessary. Used a 0.12 layer and 15% infill to make more light. Ender 3 pro test. Probably work on other Xbox controller but I don't have one to test. Work well in PS4 and PS5 Dual Sense Controller.
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
Type Protractor Size: 150 x 150 x 1.50mm 360 Degrees Protractor 0 to 9 centimetre (cm) And 0 to 3 Inch
Print approx. €1.73–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
Printed with PLA,PETG, ABS, ASA, ASA275 at 0.3 or 0.2mm layer height, 30% infill with supports.
Print approx. €3.13–€3.82 excl. taxPreliminary estimate for one variant
Dieser hochwertige Aufhängehaken ist die ideale Lösung, um Christbaumkugeln, Dekoanhänger oder kleine Bastelprojekte stilvoll und sicher zu befestigen. Das Design ist stabil, formschön und speziell für eine zuverlässige Aufhängung…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Storage box for 16 bearings with optional FLEX seal. Seal is not needed to close the box. Screw is set up to print at 0.2 from bottom and 0.15 in thread area for smoother lock, everything else 0.2. Infill at your consideration. Bearings…
Print approx. €3.44–€4.20 excl. taxPreliminary estimate for PETGSource material: PET
Just a remix for a different range. Starts at 260 on bottom, and then decreases in 5 C intervals to 230.
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for PETGSource material: PET
Less carrying. More rolling. Move It! adds wheels to items that are awkward to carry. Place the rollers beneath the edges of your item and, when needed, secure them with a 25 mm tension strap. The ribbed, L-shaped body supports the corner…
Print approx. €7.05–€8.61 excl. taxPreliminary estimate for PETGSource material: PET
Panel mount for XT60H-M connector. This variant was used on material that was ~ 0.625" / 15.875mm thick. Plug is a tight friction fit, installed from the back. The inner plate has just enough protruding to locate it in the hole and hold…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Printed it on my MK3S+. I use PETG for it and 30% infill. Remix because it is for 4mm cable and not for 10mm cable.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Printed in PETG 40% infill
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
This a handle I made for my print lab. Making it visible helps to explain what is topology optimization and generative design. But above all it has a very special “alien” look. I do recommend to use supports , 0,4mm nozzle and 0,2mm layer…
Print approx. €7.56–€9.23 excl. taxPreliminary estimate for one variant
Optimized hooks for the inner diffuser sheet of the foldable Godox 60cm x 60cm Softbox (Godox SGGV6060). The inner diffuser attaches to elastic loops inside the Softbox with four small self-locking steel hooks that are fiddly to attach…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
Moin! Der Sockel für das Arduino Mega 2560 hat 4mm Löcher, 6 tief, für M3 Gewindeeinsätze. Passend dazu habe ich noch ein Prototypenboard entworfen, in das noch die beiden Steckleisten von meinem Arduino Koffer passen. Der Arduino-Sockel…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
Print, plug, and play! It’s a good idea to start with the test print first to check if the lights fit properly. Material: PETG Size: 230x200x6mm Twinkly: Strings Multicolor / 600
Print approx. €8.80–€10.75 excl. taxPreliminary estimate for PETGSource material: PET
Fraesschablone Netzschalter / Netzfilter - Virtueller Pinball (VPin) Für meinen Virtuellen Flipper habe ich 2 polige Netzschalter bzw. Netzfilter eingebaut. Abmessungen 47mm x 28mm Abstand vom Rand bis Aussparung: ca. 60x60mm Ecke Platte…
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant
Contact Name: Isaac Gibbons School: Eastwood Schools / Team 607 BEST Hub: Montgomery BEST SUMMARY This is designed for the BEST Robotics Low G competition. It is a compact water filter designed to process and filter water in all states of…
Print approx. €31.83–€38.91 excl. taxPreliminary estimate for one variant
Change parameters in Fusion 360 to generate your custom washer. Changeable parameters are I believe self explanatory: innerDiameter - inside diameter of hole of the washer outerDiameter - outside diameter of the washer thickness -…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for one variant
Edit 8/3/2024: Added template without magnet holes. They are still in the sketch but they are not extruded. This easy to use template lets you make your own blank Gridfinity blocks. Sugested workflow: Open the template file. In the Modify…
Knife sharpening helper / guide for 60 x 180 mm whetstones. Remix of "Whetstone sharpening helper" by Rejd (thingiverse.com/thing:2493459). Sliders, slider angles and base plate shape were modified. Max stone height: 30 mm Angle…
Title: 3D Root Watering Spike 15cm - 360° Irrigation System Description: An innovative and effective solution for indoor and outdoor plant care! This 15cm watering spike is designed to deliver water directly to the root zone, preventing…
Collection of 2020, 2040, 2060 and 2080 extrusions. The model is 1mm in the Z-axis so it is easy to scale it to wanted length. Also included the .dwg file if you want to make changes to the model. Category: 3D Printer Parts
Files for the XT30, XT60 and XT90 are now here…. EDIT: 8/10/22 Created the parts with raised letters. Mark them with a felt pen to make them easy to stand out. I got tired of fighting to keep the plug and wires in place while soldering…
These are not go over guards and replace the stock removable cage! (See Pics) They are tested in my own reef tank! They provide a cleaner look then a go over guard and the added safety of one! No more daily cleaning of quick to clog foam…
🐉 Dragon Scale Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a Dragon Scale–style flexible mesh , entirely modeled from zero in Fusion 360…
Переходник - крепление для камеры Xiaomi Mi Home Security Camera 360 Adapter - mount for Xiaomi Mi Home Security Camera 360 Category: Camera
I use this for making obstacle course for Sphero droids, but it will be great for any RC toy like cars for your kids! Size Base 45mm x 45mm Hight 57mm Wall thickness 1.2mm Main features Stackable - for easy storage Fusion360 file included…
I needed this to design a case for a WLED board so thought I'd upload it for others. It's Parametric (has parameters you can change for every measurement) so you can easily tweak it for your specific board. Hide the aerial if it doesn't…
Jarra Chop totalmente editable en f3d y step con stl para imprimir para vaso de aluminio 600cc Impresion en PLA o PETG Sin soportes
material: nut, hose attachment -ASA, seal -Flex wall layers: 3 infill: 30%
Toroidal Windmill - Self adjusting turbine The smooth spinning Bearing Mod from the popular ‘Toroidal Windmill'. Insta Reel The mod uses 608 (6x22x8) Bearings for smooth & fast long time spinning. Beautiful Windmill with Toroidal…
Printable front bezel compatible with micro desktop computer models 3060, 5060, 7060. Add some colour to your dull desktop machine. In a corporate environment it is also helpful if you want to identify machines by grouping them in colour,…
This is a Scalable Hinge designed in Fusion360, i'm new to 3D Modeling and printing, i needed a hinge for one of my designs and lost a lot of time redrawing the Hinge to fit my needs. so i designed this simple scalable hinge, it took me…
A simple holder for the AS5600 magnetic encoder. The boards press fits into the the holder. It uses the mounting holes already on the stepper motor. Printing downloads 0.2mm layer height No supports required
SS Daniel J. Morrell was a 603-foot (184 m) Great Lakes freighter that broke up in a strong storm on Lake Huron on 29 November 1966, taking with her 28 of her 29 crewmen. The freighter was used to carry bulk cargoes such as iron ore but…
For the fixing of the comb and the device itself, we need 5 screws m3x8mm. For attaching the guard holder we need m3x20 or we can use glue. The current files are slightly different from the ones in the picture, I had to do some…
I created this STL to help fit my Asus Ryujin ii 360mm radiator in the top of my Lian Li O11D Mini case. By default, this case is not made to support that large of a radiator on top. Lian Li sells a bracket kit to do this very thing but…
I recommend 4 top and bottom layers, 3 walls, 30% infill.
This is my edition of a "Ultimate Guard" deck box. They do not make the ultimate guard deck box in a 60+ version. They only make them for commander decks. So I used Fusion 360 to build my own version from scratch. This deck box will hold…
A basic clip for a Beeline Moto 2, which (supposedly) fits Velo 2 as well. Modify as reqired, F3D included… I didnt spend a gross amount of time doing it and it was done to best print on my printer which isnt tuned in the best. But i have…
A 60 degree connector for LEGO train tracks (not DUPLO). Updated with a fixed .STL (this was one of my first designs and there were some small overhangs I hadn't noticed). No supports needed, but there are small ones built in at the end…
This model is compatible with the lego system.
Mount for magnetic encoder ,module with AS5600 , use a 608 bearing .
Case for Arduino UNO, CNC Shield and 60x60 or 40x40 fan (grbl).
This is a spacer that can be fitted to Shimano Deore disk brakes, so that wenn you remove the wheel with the brake disc and accidentally activate the brake, the brake pistons dont fully close and you are still able to insert the wheels.…
Summary This remix fixes two things the original did not address: needed to allow cable to pass up/down through hole(s) in surface to which the pulley is mounted, and the wheel itself was too large. Details @hedberg : thanks for the…
I wanted a G-clamp to use to mount a power strip onto my workbench. I needed a different size though, so I redrew johann517's G-Clamp fully printable in Fusion 360. To edit it in Fusion 360, download the f3d files and upload them into…
So i made these cases to fit an insta360 x3 camera with the lens guards, it has a tpu insert that holds the camera in place and should be soft enough to not damage the lens. it also should fit the camera without the guards and without the…
This model is compatible with the lego system.
Just the basics to get you started on whatever custom servo horn you need to make. Works great for futaba style 25t 20kg
Remixed Noctua High-Efficiency Fan Grill to fit 60mm Fans for Voron Trident and 2.4. I made this so I can have slightly quieter skirt fans.
I started with Dante's IO Shield blank and laid over an image of the IO shield. I converted the layout image to an SVG file and used Tinkercad to cut the port locations into the blank. I got it first try but the IO shield was a tight…
To hang a standard 8-19mm 11-piece wrench set to a wall. It fits all brands, bit it's designed for a wera joker 6000 ratchet ring set If you want the change direction small to big, left to right just mirror both models. They have a small…
Summary A simple & practical protractor & compass providing a full 360° of use. Useful for measuring or drawing circles, arcs & lengths in ½ centimeter increments. It's size & ruggedness makes it Ideal for woodworking or metal work. The…
Simple sliding lens cap for the UTi260B thermal camera to protect the sensor better. The camera ships without case or lens cap and I felt that it needed one. while designing additional close-up lens holder I drafted the profile of the…
This crankshaft locking tool allows loosening and torquing of the crankshaft pulley bolt at the front of the engine. This bolt needs to be removed to perform the belt service. This tool should be printed with thick walls and at least 80%…
A 60mm net cup that I made for a mason jar. Could be used for hydroponics. Can be a substitute for other net cups 4-21-20 Added 3 inch and 2 inch, tested both, they are supportless Print Settings Printer: Ender 3 Pro Rafts: Doesn't Matter…
360° Drehteller, Drehständer, Drehplatform, Fotografie, manuell oder elektrisch mit Hintergrund Habe hier einen drehenden Teller für Fotografie oder 3D Scan gebaut. Der Hintergrund ist perfekt zum Fotografieren für Modelle. Passend dazu:…
A diffuser to smooth your Sony a6000 pop-up flash! Measured to fit your Sony camera flash, * might* fit in similar models Conscientious Topology design Precisely measured with sufficient clearance for a snug fit Alternative version of the…
There are two version: SpringyWalls (recommended) and regular ThickWalls. Make sure to turn on thin walls detection for the springy walls version. My settings Nozzle: 0.4mm Layer Height: 0.30mm Quality: Draft Supports: No Colored version…
Case for MT3608 Step-Up Boost Converter Module. Cable strain relief integrated (only if the cable is not too thin). The potentiometer is accessible from the outside. Has cooling vents. Print Settings Printer: Wanhao Duplicator i3 V2…
I needed simple and lightweight diffuser for macro photography. I was unable to find suitable diffuser for my Godox v860III flash so i created my own. I have 2 macro lenses: Laowa 100mm and Canon 100mm and this diffuser works well with…
This printable cord wrap is designed specifically for the KitchenAid Professional 600 Series stand mixers, including the KP26M9XCOB and other 6‑quart bowl‑lift models with the same rear housing shape. The mount attaches to the back of the…
This model is compatible with the lego system.
If you need an IO-Shield for your ATX/ITX mainboard, you can use this as a base template. Print it out once, screw down the mainboard and then measure / shoot a photo. Then you can align the sketch in fusion 360 to fit your mainboard.…
A very big thanks to TBone for having created this model in Pepakura, Check out the link http://53rdfac.proboards.com/thread/969/galactic-marine-pepakura You can also down load this and other pepakura models from TBone9600's link below…
case for 7 inch 1024x600 IPS touchscreen and raspberry pi 4. case uses m2 screws to hold everything together.
Based on @Consti1606 work. Many have complained about having to scale up for his model, which is due to a very tight fit due to poor dimensional accuracy and lack of tolerances in some areas. The original model left permanant damage to my…
This All-in-One 360° revolving desk organizer will help you to stay organized with style! A sturdy and stylish organizer that has been designed for 3D printing and can be rotated for easy access to your daily stationary - or even be used…
Nests in drawer indentations and has a chamfered base to easily grab small parts from the bottom. I
Do you have too many video games and boring walls!? Then you have come to the right place! This wall mount rack is designed specifically for Xbox 360 games with the bottom piece being branded (whether you can do multi-color or single…
Not the cleanest scan since it's all either black or reflective. But should be good enough for designing mounts or adapters.
3030 and 3060 profile elements. Fix using M4 * 16 screws and M4 * 15 washers. Prints completely support free, no sacrificial layers. Use .4 nozzle with 3.5 walls or .6 nozzle with 2.5 walls (alternate extra wall). Preferred Materials for…
This model is compatible with the lego system.
This is a quick 3D model of the DS5160ssg 60Kg Digital Servo. It's purpose is to help you design servo brackets and other parts that require a big 60kg servo. * Just import this model into your 3D design software and now you have an…
I have also included the STEP files for all 3 sizes. How I Designed This: The original STL was converted back to a solid model in Inventor. I sectioned the model. Then copied and moved the sections around as needed. Finally all sections…
Last year I modified my laptop to support an external graphics card using the EXP GDC Beast (v8.3 in my case) adapter, allowing me to play relatively modern games when away from my main rig. Rather than have the card exposed, I designed…
Original model worked great, but I don't have 606ZZ ball bearings and needed metrical clamps. So here is a remix working with two 608 bearings (print the Roll.stl twice and glue them together). Additionally I made some versions of the…
2020 Corner bracket (Angled Triangular Prism) 20x20 - 40x20 - 60x20 - 80x20mm Spec: Hole diameter 4.2mm (M3-M4 Socket Head) Slot 8.5x17.2mm Suitable for: 20x20mm extruded aluminium…
This Universal HOTAS/JOYSTICK CHAIR MOUNT w/ Optional Cup Holders has holes to mount a Virpil Mongoose CM3, VKB Gladiator EVO, Thrustmaster T.16000m Joystick/Throttle, Turtle Beach Flight Deck Joystick/Throttle and more. You can always…
Here you find a few safety caps for the XT-battery-connectors. All of them are printed with TPU (Shore 95 or 90). You need a cable tie to attach it to the cable. Happy printing!
I began designing my CMF Phone 2 Pro case based on the provided mesh. But it sucked hard ;) Bad performance and issues with the converted Object… Additionally, after test printing, I discovered that the large screw would not fit (it was…
I wanted a custom strike plate for an outside door that I have that was marking up the door frame because of how it was installed. It had to be longer than standard with a custom spacer. I did find some strike plates already on…
I replaced DeepCool CH160 glass panel with this design which replicates the 3.5mm squares on the rest of the PC case. I printed this on BL P1S and split the print down the center. I added butterfly clips which are used to keep the two…
Eclosure for WX-2412 24V power supply board. It was designed with 3D printing mentality. No supports needed. CAD files included. Features: -The 40mm air intake fan -XT60 connector for DC output -IEC320 C14 socket for AC input -Easy…
Time machine recreation from the 1960 movie. Used tinkercad to create but I'm no expert. For that reason I included some of my working files in case anyone can improve on this. For instance the filigree on side rails isn't right, and the…
update 09.02.2023 added geometry for holder of drill handle PS: my print quality looks very poor on this image.. probably printed it a bit too fast – and the angle of the light makes it look ugly hehe.
I've uploaded wheels in 45mm and 50mm diameter, bearing takers and straight to axle type. I recommend 45mm for most anti frames but let me know if you would like other sizes added. I've also added a fusion 360 file which has a template…
Rebuilt in Fusion 360 from basic bodies, so it's easier to extend! It is easy to build your perfect [soap/tool/toy/brush/headphone/etc] holder right in Fusion 360 without messing with meshes. It fits very well, snaps in with a nice click…
Bearing Caps for Fidget Spinner Bearing Typ 608 22x8x7mm
![[Fusion360] Scalable parametric Hinge](https://media.printables.com/media/prints/616849/images/4912458_9a253261-625f-448c-b678-498ea5fc82c6_752b6bdf-fd04-40f0-8795-f2ef6576d38e/nvidia_share_3urs9nertg.png)
