608 skate bearing case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
608 bearing case for 16pcs, in 4x4 columns with optional seal and lock screw, good for skaters
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 91
- Makes
- 2
- Views
- 566
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
Storage box for 16 bearings with optional FLEX seal.
Seal is not needed to close the box. Screw is set up to print at 0.2 from bottom and 0.15 in thread area for smoother lock, everything else 0.2. Infill at your consideration. Bearings are touched from top and bottom by inner ring, small tolerances are in play, so bearings will not sit there tight. If you want to achieve tight lock, stick paper on inside tips of the lid to lock them from rattle movement.
Tested with PETG and 90A Flex from spectrum on 0,4 and 0,6 nozzles .
Optional supports configured in 3mf for lid part, elsewhere not needed.