Jonsbo C6 Panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fixing the Jonsbo C6' Notoriously Bad Air Flow by Replacing the Panels with Custom Ones
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 262
- Wydruki
- 0
- Wyświetlenia
- 1118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
The Jonsbo C6 ITX Tower has notoriously bad air flow. These panels let enough air through.
No supports, no additional parts required, just print an install.
I included:
Meshed versions which I created inside orcaslicer with a modifier (15% 3D Honeycomb Infill, 0 top and bottom shell layers)Solid version for you to modify according to your wishes in the slicer
STEP files for you to go crazy in CAD
Edit 29.06.2026:
Removed the "meshed" STLs. Apparently the export of the meshed versions from OrcaSlicer doesn't work
Get the meshed side panels following step-by-step guide in OrcaSlicer (see screenshots).
Right click on loaded panel STL -> Add Modifier -> Cube
Scale (hotkey: S) and Move (hotkey: M) modifier to position
Move cube so that it penetrates the panel
With generic cube selected:
Top shell layers to 0
Bottom shell layers to 0
Sparse infill density 15% (you can play around with this)
Sparse infill pattern: 3d Honeycomb (you can play around with this)
Slice plate and you're done!