1 / 5
DOORKNOB WALL SAVER NO AMS NO SUPPORTS — zdjęcie 1
1 / 5

DOORKNOB WALL SAVER NO AMS NO SUPPORTS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed as a simple wall saver to protect against the doorknob going through the drywall. Use any color.

Ocena
0 / 5
Polubienia
4
Pobrania
22
Wydruki
1
Wyświetlenia
64
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution

Designed myself using fusion 360 as a simple round wall saver to protect against the doorknob indenting the drywall.  4.5 mm thick.  82mm diameter or .1775 inches thick, and 3.285 inches base diameter, I recommend rotating model over to place the smaller diameter on the bed to have a better surface finish facing out.  No supports if rotated (45-degree taper). Customize any way you like and protect your walls.   Recommend using 100% infill for strength.  model shown was printed with sunlu white petg.  Please like and upload your makes for other makers to see.  Happy printing.        

Tagi