Magnetized Hampton Bay Hawkspur 52 in. Light Cover / Diffuser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetized Ceiling Fan Light Shield / Dimmer / Diffuser
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This ceiling fan has a ridiculously bright light/lamp, even on the warmest setting and the lowest brightness.
The cover is 10" in diameter at its widest, which is too wide for a Prusa MK3s+, but will just barely fit on the build plate of a Bambu P1S. The ring is 3/8 inches wide. Color is Inland / Micro Center Tough PLA Denim Blue. Magnets are 5x3. There are 3 pressed and glued into each hole. 24 magnets needed total. The ring cover has a very good snap / connection to the ring of the ceiling fan.
The light shields are 9" in diameter and set to 0.12m in height. Scale the model to your preference. I recommend setting the height to .4mm and first printing a two layer shield to test the dimming / diffusing amount. Color is factory Bambu Orange from the trial pack.