Extrusion monitor mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Space saving solution for your microphone.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- GNU General Public License v3.0
I tested this model only with Behringer C-1U, if you want support for your microphones PLEASE REMIX.
I needed a space saving microphone holder solution but couldn't find anything. Everything was too bulky or wouldn't fit in my setup. So I made this modular one with aluminum extrusion under monitor.
I put 3M double-sided tape on top of the extrusion, I made sure to put a lot of pressure on it, pressing the tape to table with extrusion on top so it adheres well. Then I removed the protection film from the other side of the tape and did the same thing, but pressing it to bottom side of the monitor.
You will need:
- 2x M3 T-Nuts
- 3x M3 threaded inserts
- 5x M3x8x
- Aluminum extrusion profile 20x20
- 3M strong double-sided tape