1 / 3
Electrical Wall Plate - Shelly Inside
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Switchplate or receptacle box cover with Shelly Inside engraved to denote the presence of a relay.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a switchplate for a 2-gang box that had one blank side. Since this particular jbox had a Shelly 1PM inside, I decided to make that clear. It was easy enough to make a normal 2 rectangle version as well, so I did.
Files:
- 2-gang, 2 rectangles
- 2-gang, 1 rectangles and 1 blank
I printed facedown in PETG with a .6 nozzle with some minimal support to help the sweep of the bevel get off the plate. Cleaned up the support with a block plane.
I suspect the engraving/deboss would be clearer with a .4 nozzle, but it was fine for my needs.