PUSH Industries Shock Hardware Extraction Tools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Double-sided drift and cups to extract Push Industries .875" eyelet shock hardware. Printed & tested in 3DFUEL PCTG.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Print settings etc:
Printer: Bambu Lab A1
Filament: 3D Fuel PCTG
Filament Profile: 3D Fuel's PCTG Profile for A1
Infill: Increase wall loops until 100%
___________________________________________________________________________
I made these cups to easily replace PUSH's non-standard .875" eyelet hardware at home. This kit includes four pieces that should handle most all Push specific hardware.
The drift is double-sided and is made to extract both roller bearing(the side that has the typical stepped lip) and spherical bearing hardware(the side that has the circular clearance for the spherical inner race).
The extractor cups are labelled for their appropriate use.
In one case, I could not remove the spacer attachments hand pressed into the spherical bearing (due to corrosion) so I have also included a longer spherical bearing cup to be used with with the spacers in place, see “PUSH Spherical Bearing Cup v1 (Clearance to Leave HW Installed)”
The drift and cups are meant to be used with any 8mm rod bearing press.
Recommended bike specific presses I use and test with:
> RWC MODULAR SUSPENSION BEARING TOOL SET (pictured)
> Enduro Bearings BRT-060 Linear-Press Bearing service toolset
_______________________________________________________________________________
If you would like my models in different file types to facilitate easier modification or reverse engineering, send me a message and I'd be glad to provide them.