1 / 3
Miata ND / MX-5 (2016+) Mishimoto Shift Knob Adapter (MMSK) – OEM Height — zdjęcie 1
1 / 3

Miata ND / MX-5 (2016+) Mishimoto Shift Knob Adapter (MMSK) – OEM Height

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A low-profile adapter that lets your Mishimoto Weighted Shift Knob sit like stock on your ND Miata, without the awkward

Ocena
0 / 5
Polubienia
1
Pobrania
23
Wydruki
0
Wyświetlenia
252
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

📝 Description

This custom-made adapter lets you fit a Mishimoto Weighted Shift Knob (M18 × 1.5 internal thread) on the ND Miata / MX-5 (2016+) shifter (M10 × 1.25).
Unlike the tall universal adapters that come with the knob, this design restores the OEM knob height and feel, keeping the shifter position clean and stock-like.

🔧 Features

Correctly adapts M18 × 1.5 (knob) → M10 × 1.25 (shifter).

Brings Mishimoto knob height back to near-OEM level.

The design includes a slot to tighten the adapter to the shift knob using a coin or a flat head screwdriver

Solid single-piece design with smooth thread transitions.

Tested fit on ND2 (should fit all ND1/ND2/ND RF).

Can be tapped post-print for perfect thread feel.

🖨 Print Settings

Material: ABS / ASA / Nylon recommended (heat-resistant).

Layer height: 0.1–0.15 mm

Infill: 100 % (solid)

Print orientation: Vertical (threads up) - No support needed

After print: chase threads with M10×1.25 tap if needed for smoother fit.

🧠 Notes

The Mishimoto knob itself uses M18×1.5 internal threads - that’s the main bore.

If your printer shrinks slightly (common with ABS), scale to 101 % to match OEM tolerance.

Tagi