QIDI Q2 Part Cooling Fan Duct customizable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Unfinished Part Cooling Fan dact Project
- Ocena
- 5 / 5
- Polubienia
- 93
- Pobrania
- 256
- Wydruki
- 3
- Wyświetlenia
- 4383
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATES 11/27/2025------------------------------------------
Changed the duct fins to center the airflow
---------------------------------------------------------------------
No magnets are required and you can create any shape you want.
So the duct can be designed in one piece and easy.
The shape of the hotend_fan_bracket contributes to improved maintainability.
For more information on the bambufan mod, please visit here
https://www.printables.com/model/1462145-qidi-q2-part-cooling-fan-upgrade-to-bambufan
In my environment, the clearance with the Z screw cover is about 2.5mm.
Use at your own risk.
Bolts M3x8mm 3pcs
Insert nuts M3 2pcs
First remove the fan and all the plastic parts. Install the hotend fan bracket as shown in the image.
Next, Insert the insert nuts into the fan.
Bolt the fan and spacer to the cooling fan holder.
At this time, tighten the bolts a little at a time to make sure each works.
Attach the fan assembly to the tool head
Don't forget to measure resonances.
I'm not an engineer so I can't guarantee the performance of this duct.
cooling_fan_duct_base makes it easy to create your own fan duct.
I look forward to seeing your customizations and new tool head covers!