1 / 1
Vacuum Hose Adapter 1-3/4" to Husky Drywall Sander — zdjęcie 1

Vacuum Hose Adapter 1-3/4" to Husky Drywall Sander

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Connect your 1-3/4" shop vac hose to a tool with a ~2.1" inner diameter port.

Ocena
0 / 5
Polubienia
2
Pobrania
8
Wydruki
1
Wyświetlenia
167
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This 1-¾" vacuum hose adapter is based on an older (~2010) Ridgid shopvac, and was designed to fit a newer (~2025) Husky drywall sander.
It can be used to plug any ~1-¾" hose inside any ~2.1" port.

The design is a cylinder with a tapered shell to allow clearance at the opening and a good sealed interference fit as you press in the hose. I leave it in the tool, so it's always ready to go and doesn't ever get in the way.

Shop vac model: Ridgid WD1636 Wet/Dry Vacuum, 1-¾" outer diameter hose
Sander model: Husky 82632 9-1/4 in. Dust Free Drywall Hand Sander, ~2.1" inner diameter port

Tagi