1 / 1
BIQU Nebula Mount Adapter for Yavoth
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy way to mount your Nebula Extruder to your Yavoth toolhead!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is made to easily adapt your new Biqu Nebula extruder onto a Yavoth toolhead!
To install,
- Slide in the button top screws into the orbiter mounting holes **BUT DONT SCREW IT IN YET**
- Then you can place the Nebula on top and screw it in from the bottom.
- Measure out some PTFE to 43-43.5mm to cut and place that where the old one was.
- Screw in the adapter plate on with a alen/hex key.
- You're ready to print!
***You have to put the screws in first because the extruder covers part of the head of the screw and you wont be able to attach the plat to the body of the Yavoth after the extruder in screwed on from the bottom.