1 / 4
Custom fan duct for Artillery X4 series (Pro & Plus) (.stl and .step) — zdjęcie 1
1 / 4

Custom fan duct for Artillery X4 series (Pro & Plus) (.stl and .step)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lightweight, optimized, great nozzle view and heat dissipation, uses the stock fan and mounting screws!

Ocena
5 / 5
Polubienia
28
Pobrania
255
Wydruki
7
Wyświetlenia
643
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Designed for performance

  • Super lightweight, optimized airflow (designed with the help of cfd simulations)

  • Air duct based on "The Sweeper" https://www.printables.com/model/1051959-the-sweeper-flsun-t1-fan-duct

  • Minimalistic, truss-like design

  • The nozzle is perfectly visible during prints

  • The airflow is suitable for high speed printing

  • Allows easy access to extruder manual gear and adjusting screw

  • Uses the stock fan that comes with the printer

Easy installation

Minimal hardware required: 2 screws (15-16 mm long) for attaching the stock fan,
and some glue (epoxy recommended) for the pre-assembly

The 2 screws that attach it to the backplate are the stock ones

Printing

  • PETG or better (for thermal resistance) (do not use PLA)

  • 0.16 or 0.20 layer height

  • Follow the attached image for print orientation

Update – STEP file added

First of all, thank you to everyone who printed, tested, liked, and remixed this model. I honestly did not expect such a positive reception. Seeing people use and improve it has been very rewarding.

When I originally uploaded the model, I was already quite exhausted after many redesign iterations. The design is far from perfect, but I decided to publish it anyway — and to my surprise, many people found it useful.

Several users asked for the source file to make modifications and improvements, so I am now including the .STEP file to make remixing easier.

I am aware that the current design has some compromises. In particular, the very thin duct walls and the lightweight truss structure can introduce additional vibrations. These were trade-offs made to keep the part extremely light and maximize airflow, but they are definitely areas that could be improved.

If anyone wants to reinforce the structure, thicken the duct, or experiment with alternative geometries, the STEP file should make those modifications much easier.

Thanks again to everyone who printed it, shared feedback, or created remixes. I’m glad the design has been useful to the community, and I’m looking forward to seeing improved versions.


 

Tagi