Fysetc UCan Case with mounting options
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a case to externally mount my UCan to an M10 Rod on my old printer, so I made this.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a case to externally mount my UCan to an M10 Rod on my old printer, so I made this. Includes a version with a flat bottom to just use it as a loose gadget and 2 versions each of the top piece with a cutout for a small cooler on te MCU and for the secondary unpopulated DuPont CAN port on the UCan.
Takes:
- 6x M3x4 heatset inserts - 4x for flat bottom version
- 2x M3x8 FHCS (Countersunk Flathead) screws - Not needed for flat bottom
- 4x M3x12 BHCS or SHCS Screws for the case
Print with whatever settings you like, but enable shrinkage compensation. This model is not toleranced for any particular filament so without compensation it will likely end up too small/holes not ligning with the PCB.