1 / 7
100mm/4 inch Vent Intake with HEPA and Carbon Filter — zdjęcie 1
1 / 7

100mm/4 inch Vent Intake with HEPA and Carbon Filter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

HEPA intake for mushroom and plant grow tents

Ocena
0 / 5
Polubienia
5
Pobrania
48
Wydruki
0
Wyświetlenia
352
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is an intake for filtering scrubbing from a mushroom or plant tent with the 3-in-1 carbon and HEPA air purifier filter linked below.

https://amzn.to/4qZ2Vdd (Amazon Aff.)

Prints in two pieces.  Since it’s not perfectly air tight when fit together, I added gaffer’s tape. I don’t know how well it will stand the humidity, but I look forward to further testing. V 1.1 Updated with better hole sizes so that things fit together a little better.

If you get a chance to print it and/or have any feedback, let me know. 

Uses standard 3x4x5mm brass inserts to hold the duct onto the filter holder.

 

Tagi