1 / 2
Chip vacuum cleaner connector for Kity CK 26 (woodworking machine) — zdjęcie 1
1 / 2

Chip vacuum cleaner connector for Kity CK 26 (woodworking machine)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Accessories for connecting easily (with magnets) a chip vacuum cleaner on a Kity CK 26

Ocena
0 / 5
Polubienia
7
Pobrania
25
Wydruki
1
Wyświetlenia
560
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The screw and nut are designed to fit the holes under the table:

 

The connector must be attached to the 100mm tube of the vacuum cleaner:

For the connector, you can use two 40x10x10mm neodymium magnets (or four 40x10x5mm).

I used these https://www.supermagnete.fr/eng/block-magnets-neodymium/block-magnet-40mm-10mm-5mm_Q-40-10-05-N and it works perfectly.

Perhaps you can also use two 40x10x5mm + a single 40x10x5mm on the other side to unplug the tube with more ease.

 

And here is a picture, for those who don't know what a Kity CK26 is (it's a woodworking machine):

Although these parts are designed for the Kity CK26 machine, you can probably use them for other machines.

Tagi