Chip vacuum cleaner connector for Kity CK 26 (woodworking machine)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Accessories for connecting easily (with magnets) a chip vacuum cleaner on a Kity CK 26
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 25
- Makes
- 1
- Views
- 560
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The screw and nut are designed to fit the holes under the table:

The connector must be attached to the 100mm tube of the vacuum cleaner:

For the connector, you can use two 40x10x10mm neodymium magnets (or four 40x10x5mm).
I used these https://www.supermagnete.fr/eng/block-magnets-neodymium/block-magnet-40mm-10mm-5mm_Q-40-10-05-N and it works perfectly.
Perhaps you can also use two 40x10x5mm + a single 40x10x5mm on the other side to unplug the tube with more ease.
And here is a picture, for those who don't know what a Kity CK26 is (it's a woodworking machine):

Although these parts are designed for the Kity CK26 machine, you can probably use them for other machines.