1 / 3
1965 - 1979 Ford twin I beam bushings.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Works on both sides.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Twin I Beam Bushings.
I suggest printing in TPU or other flexible rubbery filaments. The bushings should be printed to be firm while remaining slightly flexible. I would suggest keeping wall thickness down focusing on infill to get the correct level of “squishiness.” No supports are need to print these models.
These should work on other models with the twin I beam suspension but I haven't checked.
