1 / 1
Ender 3 Extruder Tensioner Idler Bearing Lever Arm — zdjęcie 1

Ender 3 Extruder Tensioner Idler Bearing Lever Arm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ender 3 Extruder Tensioner Idler Bearing Lever Arm

Ocena
4,556 / 5
Polubienia
40
Pobrania
859
Wydruki
11
Wyświetlenia
2375
Oceny
9

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

My tension lever cracked on my Ender 3, leading to under extrusion problems. This is a replacement part that I designed to not require any changes. The bearing screw hole is slightly undersized to allow the screw to thread into the plastic, but you could oversize the hole for an insert if you want.

I printed in PLA, 100% infill, no supports

 

UPDATE:

The spring holder is not quite in the right location, but it still works for me

 

My PLA print failed after 5 months (it bent so there wasn't enough tension), so I reprinted the part in PETG, 100% infill.

Tagi