1 / 1
Phone holders for Ikea Livboj wireless charger, for a phablet and Pixel8 Pro — zdjęcie 1

Phone holders for Ikea Livboj wireless charger, for a phablet and Pixel8 Pro

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Another Livboj charger holder, one for larger phones or phablets and one for Pixel 8 Pro

Ocena
5 / 5
Polubienia
7
Pobrania
38
Wydruki
1
Wyświetlenia
183
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

A couple of Ikea Livboj charger puck holders. One is for larger phones and phablets like my Power Armor that need a 40 mm distance from the bottom of the phone to the charging puck. The other one is for a Pixel 8 Pro. I'm told it works for Samsung S25+ too.

Printing: Prints without supports in the given orientation, but add a small brim (3 mm) to keep the fillet at the bottom from curling up. I used Prusament PLA Galaxy Black; it looks wonderful in person. But any filament should work.

Use: Simply connect the puck to the USB cable and push the whole thing in from the top.

Hint: If you are wondering about the lines on the bottom, they are there to reduce the tendency of the bottom slab to warp by breaking the long straights up. It's a useful trick if you are having issues with warping on your prints.

Tagi