SKADIS - Magnetic Strip Plate (with reversible magnets!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SKADIS - Magnetic Strip Plate (with reversible magnets!)
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Welcome to a new SKADIS gadget - The MAGNETIC STRIP PLATE with reversible magnets.
Dimensions (without hooks): 200 x 30 x 8,5mm
Other models often use magnets, too but they get irrevocably printed into the model and you would have to destroy it to get your (expensive) magnets back.
This is why we created this magnetic strip plate where the magnets (20x5mm max.) can slide in from above and get covered with a secure cap. The cap also has a round shape at the bottom to hold the 20mm magnets tight. There is another cap if you use SQAURED magnets (20x20x5mm max.).
When the day comes you won't need this magnetic strip plate anymore just remove the cap and let the magnets slide out. Done!
Please do not hesitate to have a look to our OTHER SKADIS MODELS.
Have fun!
Material: PLA
Layerheight: 0.2mm
Infill: 15%
Supports: Yes, only on baseplate
We used tree supports which worked very well. You can print either face down for a nice front cover or with the gap face down. Both works.