Broom/Painter Pole mount for Arrow Antenna with Rotatable Polarization
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Painter pole antenna mount for Arrow Yagi-Uda with rotatable surfaces to more easily swap between polarizations
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I printed in PETG with organics supports, however the supports were a bit fussy after removal.
I designed this to work with M3 fasteners, though I have slightly increased the clearances in the model since printing. I only populated the outer sleave fastener (20mm M3 nut/machine screw)
This is the second revision of this design, though it's still not perfect. If I revisit this model I will make the two pieces slide into each other more easily, and I will add clearance for the rivet that is near the center of gravity on the middle mast section.