Broom/Painter Pole mount for Arrow Antenna with Rotatable Polarization
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Painter pole antenna mount for Arrow Yagi-Uda with rotatable surfaces to more easily swap between polarizations
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 31
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I printed in PETG with organics supports, however the supports were a bit fussy after removal.
I designed this to work with M3 fasteners, though I have slightly increased the clearances in the model since printing. I only populated the outer sleave fastener (20mm M3 nut/machine screw)
This is the second revision of this design, though it's still not perfect. If I revisit this model I will make the two pieces slide into each other more easily, and I will add clearance for the rivet that is near the center of gravity on the middle mast section.