132 models
Complete Yagi Antenna Clamps Collection — Universal, Dedicated & 6m Heavy-Duty (Boom 15 to 30 mm) A popular, highly versatile antenna clamp collection designed to fit multiple Yagi antenna configurations. Thank you to the ham radio…
The SaVVy is a lightweight 2 element portable yagi antenna based on commonly available 17' whips as the elements. Covers 20-2m bands. I designed this for 3/8-24 whip mounts, but it can be easily modified for M10. The whole assembly…
Note: this antenna has not been tested or optimized. The design is a WIP. None of the photos included are actually from this design as I haven't built it yet. However, the photos should be close enough to give you an idea of how things go…
I need a little Wifi Yagi every once in a while so I thought I would make a 3d printed quick build antenna. While I was drawing it I thought I'd include a means to automatically measure the elements as I assemble it. Well then I of course…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
These are adjustable Yagi antenna element holders specifically designed for DIY antenna builders. They are optimized for a 10x10 mm square boom and 6 mm element tubes . The main advantage of this design is that the holders allow sliding…
Updated part geometry for better fit with 1/2" Sch 40 PVC (28-Jan-2026) I give Uda first billing since he never gets the credit he deserved because his name isn't as cool sounding as Yagi. This project is for parts to make a 2M beam…
This add-on is designed as a practical handle extension for the Draussenfuchs Yagi Antenna Holder and allows you to securely attach your handheld radio directly to the antenna setup. With this handle, the radio can be plugged into the…
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
[PT/BR] Neste projeto é disponibilizado suportes e outras pecas para ajudar a montar antenas do tipo Yagi e do tipo Moxon, focando primariamente em elementos de 3.2mm e um boom de 16mm. No futuro outras medidas de boom serão…
Frequency F: 868 MHz Wavelength λ: 345 mm Element diameter D: 1.6mm Material: 1,6 mm copper tubes Total number of elements : 5 Gain: 10 dBi Reflector length R: 168 mm Vibrator position F (R-F): 69.1mm UPD (15.03.26) - Vibrator length F:…
To install this you will need to remove the foam handle, which can be done by pushing from one end and pulling from the other. Eventually it will slide off. Remove the 2 rear antenna elements and slide the mount on, then reattach the…
This is intended to be printed in TPU and inserted in place of the plug in the end of the arrow yagi antenna tube. I found that holding the end of the antenna against my body while aiming the antenna helped with the weight a lot. This…
These are adjustable Yagi antenna element holders specifically designed for DIY antenna builders. They are optimized for a 10x10 mm square boom and 6 mm element tubes . The main advantage of this design is that the holders allow sliding…
Requires 1/4"-20 insert. I used this one: https://www.amazon.com/dp/B09MTS6ZZQ S version is intended to save filament. Adapter 2 is for a better centered post mount. It also prevents the Alfa mounting plate from bending when tightened.
Eine Antenne für die Funk-Fusch-Suche des draußenfuchs Projekts ( www.draussenfuchs.de ) Durch die vertikale Anordnung der Elemente können diese bei Kontakt mit Ästen oder Büschen nach hinten weg klappen. Vielen Danke an Harm (DK4HAA) für…
This desogn is obsolete, please use new version ! Inspired by OK1RF idea for a rectangular boom profile guaranteed to squareness element mounted to boom with only one screws recesses for nuts diameter identification element Also published…
This handle fits the K6ARK 2 Element Quick Yagi antenna found here - https://k6ark.com/2-element-quick-yagi/ Works best when printed in TPU. Printed in TPU, 15% infill, no supports, no brim.
Expands the capabilities of the previous model Primarily created for the 12 element 2 meter OWA antenna from G0KSC - .stl files are generated for this version of the antenna Description of the main design features the width of the…
Simple & lightweight Yagi antenna for the 70cm band. Developed in conjunction with the ‘Touch The Universe’ project . Required hardware 3.2mm aluminium welding rods 4mm brass welding rod 25mm PVC pipe ~3mm self-tapping screws superglue /…
-Optimized model of "Yagi antanna kit" by LEXX -Tripod mount with adjustable pitch Required hardware: Tube 8mm od Or 6mm od Tube 25mm od Coax cable M3 nuts asortment of screws
Yagi antenna element holder This is just another simple Yagi antenna director or reflector holder project ready for 3D printing. It was created in Autodesk Fusion 360 as a parametrized project. Feel free to modify it for your antenna boom…
I initially used the scad files at the thingiverse link to generate brackets close to the size I needed for the aluminum element diameter, and round boom diameter to clamp them too. If you want to do this just download openscad and do it…
Hi, l'm an amature radio operator avid transmitter hunter. The tape measure Yagi is a must for any t-hunter and should be in any armature radio operators kit. Building a tape measure Yagi is almost a right of passage. You can use a tape…
Instruction: Hardware: Printable parts Aluminium profile 20x20x1.5mm Aluminium pipe or rod 6mm M3x5mm screw - 4x or 2x (see below) M3x20mm screw - 2x M3 nut - 4x 3mm washer - 2x M5x35mm screw - 1x per mount (or M5x30mm, but better 35mm)…
Tonna 23 cm antenna clamps 3 mm elements 16 and 15 mm boom. Elément diameter : 3 mm for 16 and 15 mm boom. Fix with nut and M4 screw. PETG. 100%. Perimeter x 6 . Don't forget to indicate that you like the model on printable.com. Please…
It allows to attach elements without drilling holes in the boom. Good for adjustment of element positions. Elements are positioned above the boom and isolated from it. Designed for 13mm x 13mm boom. Reflector, radiator and director…
An element holder is used to build Yagi-style antennas. You can position elements with 6mm diameter over a 10mm square boom and it needs only a single M3 screw for each element. Suitable for VHF / UHF antennas for portable use. Printed…
This is a simple button to replace aluminium ones I have been using. As a portable operating radio amateur I regularly transport sets of yagi elements for my 50MHz and 70MHz DK7ZB yagis. I use these buttons with 2mm diameter elastic from…
I built it using: ~3m total of tape measure, width 19mm (¾") ~80cm of Φ25 PVC tube RG58 cable 1x BNC female panel mount socket (note necessary) a piece of wire as a hairpin 6x screws M3x16 and 6x M3 nuts electrical tape 3D parts idea from…
Handheld Wifi Yagi Antenna Enclosure and Grip Mount is a clamshell design enclosure for current available yagi antenna. It provides a comfortable grip for handheld field use for direction finding using a portable spectrum analyzer (TinySA…
Pictured Examples printed on a BambuLab X1C (Textured PEI). Had a little moisture issue with my white filament, please ignore that ;) Face-down Print Settings: Initial Layer Line Width: 0.4mm Wall Generator: Arachne Wall Loops: 1 Bottom…
This is a Simple HT holder with coax clip for a 3/4" DIY Tape Measure Yagi. This model fits ¾ PVC with an added hole to use a screw to attach the holder to PVC. . . I made a video on how to make a Tape Measure Yagi that can be viewed here…
I recently made a 2m yagi tape measure antenna out of 1/2 inch schedule 40 PVC pipe to listen to some satellites pass overhead. I quickly realized that it would be easier to mount my radio on the antenna for ease of handling. This is an…
[EN] Sorta the antenna I have made from 15mm copper pipes. The crossbar is 15x20 mm wooden bar. The antenna cable is 5D-FB (8mm 50 Ohm). There are some holes in holders for that one, although I've made some mistakes making the holes for…
Do you wish you could attach something to your Arrow Antennas Yagi boom? Look no further! Print in PETG. Use a ¼" 20 - ½" bolt.
Cechy modelu: Kompatybilność z rurami o średnicy 25 mm – profil dopasowany do typowych rur aluminiowych lub stalowych. Montaż do boomu za pomocą cybantu (obejmy stalowej) – przewidziane dwa otwory przelotowe na standardowy cybant M6.…
Chameleon Antenna CHA TACYAGI-70 new GRIP MODULE https://chameleonantenna.com/collections/yagi/products/tacyagi-70 I was not happy with the grip that came with it. Decided to modify my radio gear. I have about 120 hours into this grip…
same object with enlarged hole. Do not use this with modern routers as they are likely to use PCB antenna and no longer compatible with this mod. Category: Computer
Bring calm and creativity into your space with this elegant puzzle inspired by the harmony of bonsai trees. Perfect as a mindful brain teaser or minimalist decor. 👉 Includes a set of 6 unique “branch” shapes and a bowl model for…
This 3D printed mount system is designed for building a simple 3-element Yagi antenna using 20mm PVC pipe as the boom and 8mm diameter rods for the elements. It’s ideal for amateur radio or experimental use. The dipole center support fits…
These two files, one for a round boom and one for a square boom, allow the use of whatever choice of boom and element diameters you may want to use instead of being forced to use diameters that fit commercially available brackets. The…
“Draussenfuchs” ist eine Funk-Fuchsjagd auf dem freien 430 MHz-Band (und somit nicht nur für lizensierte Amateurfunker ein Spaß). Die Webseite hat Anleitungen für alle nötigen Komponenten, unter anderem auch eine Yagi-Richtantenne (die…
Simple clip I made for my 2m & 70cm band yagi antennas. The uploaded STLs are made for a 45mm wide bar. If you want to customize them for your measurements use the OpenSCAD file and the built in customizer. I do not recommend making clips…
Abmessungen (Changpuak-Berechnung, 868 MHz) Frequenzbereich : 850-885 MHz Wellenlänge : 346 mm Boomlänge : 336 mm (Ø 18 mm) Elemente : 6 (Ø 2 mm, Messingrohr) Gewinn : ~9 dBd Elementlängen & Positionen: Reflektor: 167 mm (Pos. 0 mm)…
Materialien & Bauweise Boom & Halterungen : PETG (Outdoor-tauglich) Strahlerelemente : 2 mm Messingrohr - Abmessungen siehe dozorfeo Sleeve-Balun: 6 mm Messingrohr für RG58/Aircell5 Montage : Sekundenkleber + modulare Adapter…
Einsatzmöglichkeiten flexible Ausrichtung der Yagi-Antennen Montage an Rohren, Masten, Geländern usw. geeignet für Outdoor-Einsatz Materialien & Bauweise Überwurfmutter und Kugelgelenk gibt es bei : ChrisAeroEngineering – Lockable Ball…
Bohrschablone für die Faltyagi von SwiftyTheFox.
Adaptor to grip the antenna with a Piccatini rail for pistolgtips
Design Concept The SR. MIYAGI figure is inspired by the legendary character from The Karate Kid movie series, capturing the serene and wise demeanor of the martial arts teacher. Purpose This model serves as a collectible for fans of The…
Elément diameter : 4 mm for 15 mm boom. use aluminum for the elements and brass for the dipole. Fix with nut and M4 screw. PETG. 100%. Perimeter x 6 . This design remains experimental errors are possible. Particular attention will be…
This adapater lets you mount an airsoft pistol grip onto a wifi yagi antenna. The antenna specifically was the Luqeeg wifi yagi, and the pistol grip was from an old ICS M4. A lot of these parts look the same, but fitment may vary so remix…
Makes it easier to assemble the 868 MHz LoRa Yagi by Taste The Code. Assures the dipole is square and symmetrical inside the boom, with 2mm spacing. https://makerworld.com/en/models/1120277-yagi-antenna-for-lora#profileId-1118525
Updated part geometry for better fit with 1/2" Sch 40 PVC (28-Jan-2026) I give Uda first billing since he never gets the credit he deserved because his name isn't as cool sounding as Yagi. This project is for parts to make a 2M beam…
This add-on is designed as a practical handle extension for the Draussenfuchs Yagi Antenna Holder and allows you to securely attach your handheld radio directly to the antenna setup. With this handle, the radio can be plugged into the…
Frequency: 850-885MHz Gain: ~10dB location and length of elements (from left to right): Vibrator length: 173 mm Length of the reflector: 181 mm Director 1 length: 164 mm Director 2 length: 162 mm Director 3 length: 160 mm Montage:…
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
[PT/BR] Neste projeto é disponibilizado suportes e outras pecas para ajudar a montar antenas do tipo Yagi e do tipo Moxon, focando primariamente em elementos de 3.2mm e um boom de 16mm. No futuro outras medidas de boom serão…
Frequency F: 868 MHz Wavelength λ: 345 mm Element diameter D: 1.6mm Material: 1,6 mm copper tubes Total number of elements : 5 Gain: 10 dBi Reflector length R: 168 mm Vibrator position F (R-F): 69.1mm UPD (15.03.26) - Vibrator length F:…
BOM: 10mm PVC Tube: 4x 33,5cm 2x 12cm 1x 17cm 4mm Aluminum Rods: 1x 29cm 1x 31cm 1x 33cm 3x M3x5x4 press in nuts 3x M3x10 Hex-Screws Wire ~2.5m eg. LiYv 0,25mm² BNC Socket (example:…
BOM: 10mm PVC Tube: 4x 33,5cm 2x 12cm 1x 17cm 4mm Aluminum Rods: 1x 29cm 1x 31cm 1x 33cm 3x M3x5x4 press in nuts 3x M3x10 Hex-Screws Wire ~2.5m eg. LiYv 0,25mm² BNC Socket (example:…
To install this you will need to remove the foam handle, which can be done by pushing from one end and pulling from the other. Eventually it will slide off. Remove the 2 rear antenna elements and slide the mount on, then reattach the…
This is intended to be printed in TPU and inserted in place of the plug in the end of the arrow yagi antenna tube. I found that holding the end of the antenna against my body while aiming the antenna helped with the weight a lot. This…
Drilling template for yagi antenna elements. 08/10/12 mm élément and 4 mm drilling. 1 If you want the text, provide a 2 part print: -first print the file example : 08 10 12EL 04DRILL 1st layer 0.20 -second print above the 2st the file…
Simple WiFi and bluetooth yagi antenna holder. There is some M10 nuts in base so it is bottom heavy and stable. Also i have used some rubber feet under it. Ideal for testing or increase bluetooth range (i am using it with my headphones…
Requires 1/4"-20 insert. I used this one: https://www.amazon.com/dp/B09MTS6ZZQ S version is intended to save filament. Adapter 2 is for a better centered post mount. It also prevents the Alfa mounting plate from bending when tightened.
Eine Antenne für die Funk-Fusch-Suche des draußenfuchs Projekts ( www.draussenfuchs.de ) Durch die vertikale Anordnung der Elemente können diese bei Kontakt mit Ästen oder Büschen nach hinten weg klappen. Vielen Danke an Harm (DK4HAA) für…
Behold the SPY - the Shitty Printable Yagi! This is a six-element Yagi for 915 MHz radios, which are used in North America for LoRa applications among other things. The purpose of this antenna was to make a simple directional antenna to…
Bring the wisdom of a legendary sensei to your space with this incredible 3D printable figurine that captures every detail in stunning STL format. This masterfully designed statue showcases the iconic martial arts master in his classic…
This is 868Mhz LoRa Meshtastic Yagi-Uda directional antenna with 6 elements and square boom. Actually calculated for 869Mhz, since this is closer to real meshtastic working frequency in UE). Dimensions were taken from widely-known DL6WU…
This are the mounting brackets needed to make Ham Radio Passion (LB8IJ) Yagi antennas. These are lightweight portable antennas made out of 10mm square aluminum tube as boom and 6mm aluminum pipe as elements. The following video shows how…
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Eagle Fang Miyagi Do Logo Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at…
Yagi antenna model for 868MHz with built-in Heltec V3 (V4) module. The design consists of three elements for easier printing. The parts are assembled using glue and 4.5x9 self-tapping screws. The module cover is attached using DIN7981…
Based on dimensions from this video: Works great and is compact given its specs, I built mine using exact measuremeants from the video and it worked with no tuning, under 2:1 SWR on the 6m band. This design should scale to other bands,…
Foldable 3 Element Tape Measure Yagi Antenna for Amateur Radio Direction Finding Very good F/B ratio for easy direction finding Ideal for Draussenfuchs [1] or Amateur Radio Direction Finding (ARDF) Light weight (around 70g, without cable)…
Couldn't find a satisfying way to mount my yagi's directive elements to the boom. So I built my own. 1st draft.
Karate Kid - Daniel-San & Mr. Miyagi (Ralph Maccchio & Pat Morita) - 1984 3D printable model.
This is the enclosure and antenna guide for my 23cm Transverter, compatible with Quansheng UV-K5. Details on this project can be found at: https://www.ki6syd.com/23cm-xvrtr-for-quansheng
Just a simple bracket for mounting a 2.4ghz wifi yagi antenna to a tripod. There's a slotted area for the boom and you secure it with a couple of zip ties. The hold is the right diameter to thread the tripod bolt into. Category: DIY
For 2.4Ghz Wifi routers Wire diameter: 1.75mm (or close) How it works and how to build:
I designed the mounting parts for this field-assembly antenna to be strong yet easily taken apart for transport. The “boom” is 20mm pvc electrical conduit, and the elements are 6mm solid aluminium rod. The mountings consist of a threaded…
I designed this since I cosplay from Project Sekai, however, the Vivid Bad Squad unit outfits (For Akito and Toya specifically) are so expensive for what they are, so I decided, “hey, why not make it on my own?” I also decided to upload…
This is a Complete set of Piece in order to build a Yagi-Uda antenna that is very lightweight and portable. complete with a pistol grip handle and separate piece for the BNC connector [not pictured]. there is even a cut-out for your…
Couldn't find a Yagi-Uda style antenna for my buddy (he wargames with 1:32 scale army men) so I made one! It isn't designed with any specific scale in mind, so resize as you see fit. I also tapered a truss tower model to get the aesthetic…
This Yagi is my standard for Backpacking. I have seen many solutions for SOTA, but this one from OE6STD is very convincing: lightweight (230g) small package size (21 x 37cm) no assembly needed, just unfold and extend the boom cheap and…
Required Parts: 16mm PVC pipe 2.5mm metal rod 2x M6 nut and bolt Coax Printed Parts: Parasitic Holder - mount for the parasitic/passive elements Radiator Holder - mount for the driven elements Parasitic Holder screws rubber - mount for…
My pics aren't the best, hopefully the functionality is better though, I printed this in wood pla that I can't seem to get as nice as PETG. The pot itself should have plenty of drainage for any small plant or bonsai. Whacked a miyagi do…
Original design by by LY3LP, recalculated by George M1GEO Dimensions and design: https://www.george-smart.co.uk/antennas/dual_band_satellite_yagi/ How to print: Element holders - 4 perimeters 20% infill no support - 6 Pcs Radiator holder…
This Fox hunting antenna is constructed using 3d printed element holders (PETG, 20% fill) and easy to acquire material from a hardware store. It is a remix of thingiverse 912567 but optimized for a small, hand held UHF HT rig carried for…
“It's okay to lose to opponent. It's never okay to lose to fear.” - 8x3mm magnet to be glued in - 20% infill used in example -example printed on a mini+ using prusament filament (PLA) If you’d like to shoot some spare change or a dollar…
This coupler is an easily adjustable mounting device for 1" tape measure yagi elements on a 3/4" (ID) PVC pipe boom. The yagi elements secure with 3/4" to 1 3/4" hose clamps. The hose clamps act as friction locks for the yagi elements.…
Boom is 3D printed to avoid mistakes with drilling and is divided to 2 parts. Use super glue to and joint.stl to fix connection. Elements are from 3.2 mm al welding rods. 25mm PVC tube is used as support. Dimensions:…
08, 10, 12mm Elément clamp for yagi antenna 15, 20, 25, 30mm boom. Clamps for yagi antenna element. Elément diameter : 08, 10, 12mm and boom : 15, 20,25, 30 mm. All clamp 60mm long . 6 meter clamp 100mm long. PETG. 25% or 50%. First layer…
Cheap and simple VHF-/UHF-Yagis by DK7ZB, extreme lightweight for portable use The boom is 25 mm PVC or Al pipe. Elements are 3.2 mm Al welding rods. Reflector for 2m antenna is divided to 2 parts because is longer than 1m and is…
The Arrow II antenna is perfect for working satellites with your HT ham radio but it's difficult to hold both the antenna and the radio at the same time. Also, the Arrow antenna is front heavy. This gives you a mount for your HT and helps…
