Track for LESU rc skid-steer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Track for LESU Aoue LT5 skid-steer / tracked loader
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 433
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I made spare tracks for the LESU rc skid-steer, because it had to much grip on carpet or hard surface with the original tracks. Due to the high grip level of the original tracks, they often slip off the wheels when i turned the loader. With the self made tracks, the grip level is a little bit lower and the tracks don't slip off the wheels.
I printed the tracks on a Prusa CoreOne, Filament Primalloy from Verbatim, printed with raft but without support. I printed the tracks with different layer hights. The layers, which contain the overhang, i printed in 0,1mm layer hight, the rest with 0,2mm layer hight. The overhang is not really good, but the tracks are working good.