1 / 5
Volvo EX30 2026 Phone Holder Ball Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ball Mount for wireless phone charger.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 547
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Holds wireless phone charger - the ones with the screw on collet clamp, I included a picture of the listing I used, but really any similar one should work. The ball piece can either be superglued or screwed (four 4-40 ½" or M3 12mm) onto the long mounting bar. The ball accepts one M3 or 4-40 x 30mm screw for reinforcement, if needed.
I mounted it with 1" (25mm) wide VHB(3M 4229p) tape on the bottom surface and 1" (25mm) wide 1/16" (1.5mm) thick EPDM foam on the surface against the back of the center screen to remove any rattling or noise.