Fifine AM8 – Extended Height Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Standard Digital File License
Model Description:
This is an extended height leg/stand for the Fifine AM8 microphone, designed to raise the microphone on the desk, improve ergonomics, and provide a more comfortable recording position.
Features:
Fully compatible with Fifine AM8
Reinforced and stable design
Recommended material: PETG (PLA also possible)
Additional notes:
It is recommended to use two strengthening modifiers when printing:
• one at the bottom,
• one at the top near the thread,
to reinforce the areas with the highest stress.
The top section uses an M3 bolt with a length of no more than 30 mm.
Suggested print settings:
Layer height: 0.2 mm
Infill: 20–40%
Nozzle: 0.4 mm