IKEA Skurup Ceiling Cable Cover Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two-part cover that hides the ceiling cable hole on IKEA Skurup track lights. Snaps together using filament pieces
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This part is a replacement adapter for the IKEA Skurup track light. The original cable sleeve that comes with the lamp doesn’t always fit well – especially if the cable comes out of the ceiling at the wrong angle or the sleeve doesn’t sit where it should.
This print lets you fix that.
The adapter is made in two halves that clamp around the Skurup tube. You simply push four small pieces of filament through the side holes to lock both parts together. No screws, nothing complicated. Once attached, the cable can be guided through the bottom opening of the part.
The lower opening is slightly adjustable, so you can rotate the adapter a bit to line everything up with your cable position. It’s basically a simple external replacement for the stock cable sleeve when the original one doesn’t work in your setup.