1 / 2
Presence Director – Narrow Beam Hood for Sonoff Presence Sensor — zdjęcie 1
1 / 2

Presence Director – Narrow Beam Hood for Sonoff Presence Sensor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple snap-on hood that narrows the detection angle of the Sonoff motion sensor

Ocena
5 / 5
Polubienia
2
Pobrania
8
Wydruki
0
Wyświetlenia
167
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The Sonoff Presence Sensor has a pretty wide field of view by default. Great in general, but not when you only want motion to trigger in a very specific direction.
This Presence Director solves exactly that.

The hood slides onto the front of the sensor with a tight fit – you’ll need to press it on, but it holds securely. Once mounted, it works like a mini snoot or a tiny snapgrid (similar to what you’d use on panel lights), helping you narrow the effective detection radius of the sensor.

It’s ideal for setups where you want more control over what the sensor sees, for example hallway direction tracking, zone-based triggers or avoiding unwanted detections from side movement.

I used it to only track me being in bed without activating when im somewhere in the room

If you need the sensor to be more focused, this little attachment does the job.

Tagi