Airvape Legacy Pro 2 waterpipe/bong adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print but requires 3rd party glass piece
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Modified my AVLP water pipe adapter to fit the AVLP2.
Depending on your printers precision you might need to play around with the slicer settings to get it to fit right. I printed the model with a Bambu P1S using hard TPU, and it is a snug fit.
To make this adapter work with a 14mm bong you need to order this glass adapter (or use any other with a 10mm outer diameter): https://www.vapowelt.de/Bubbler-Wasserfilter/WOLKENKRAFT-FX-MINI-ULTRA-14-mm-Glasadapter::2789.html
If you have a bong that takes 10mm or 18mm glass there is also this one available that should fit: https://www.vapowelt.de/Bubbler-Wasserfilter/WOLKENKRAFT-FX-MINI-ULTRA-Universal-Glasadapter-10-14-18-mm::3116.html
Using this adapter, the glass piece goes all the way through, straight to the air path. There is a very small amount of contact between the vapor and the actual 3D-printed part