Case for Electrocookie 1/4 Stripboard, ESP32/ESP8266 and BME280
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A two-part case that allows a microcontroller such as an ESP8266 to be connected to a sensor in the top compartment.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a small, compact box to hold a 1/4 Electrocookie Stripboard (my favourite) with an ESPHome controlled esp8266 and BME280. The box has two lugs to allow for fixing to a wall using screws. The sensor needed to remote from the microcontroller so it isn't affected by any locally generated heat.
The two-part box allows for any of the sensors that fit the BME280 form factor.
I have used stock I2C ESPHome configurations, so the sensor can be used by Homeassistant to monitor Temperature, Atmospheric Pressure and humidity. https://esphome.io/components/sensor/bme280/