Case for Electrocookie 1/4 Stripboard, ESP32/ESP8266 and BME280
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A two-part case that allows a microcontroller such as an ESP8266 to be connected to a sensor in the top compartment.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I needed a small, compact box to hold a 1/4 Electrocookie Stripboard (my favourite) with an ESPHome controlled esp8266 and BME280. The box has two lugs to allow for fixing to a wall using screws. The sensor needed to remote from the microcontroller so it isn't affected by any locally generated heat.
The two-part box allows for any of the sensors that fit the BME280 form factor.
I have used stock I2C ESPHome configurations, so the sensor can be used by Homeassistant to monitor Temperature, Atmospheric Pressure and humidity. https://esphome.io/components/sensor/bme280/