Magnetic Truncated Icosahedron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small desk ornament that connects to the base with a magnet.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Sized for 3 mm X 1 mm circular magnets but can be scaled to suit other sizes. Can even leave out the magnets if you don't care about them.
Print Settings:
Printer: Ender 3 V2 Neo
Material: Esun PLA+
Printing Temperature: 195 °𝐶
Build Plate Temperature: 65 °𝐶
Layer height: 0.2 mm
Infill Density: 10%
Infill Pattern: Gyroid
Print Speed: 55 mm/s
Wall Speed: 27.5 mm/s
Supports: Tree
You can print it in your filament of choice and then leave as is or spray paint to create a nicer finish. For those of you into board games, you could paint on some numbers to turn this into a dice.
Find more designs on my MakerWorld page: https://makerworld.com/en/@Sentinel_Ideas