RAMPS 1.4 Fan Mount, 40mm, parametrizable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and small mount for a fan on a RAMPS1.4 board. Default is 40mm fan, however the brackets can be parametrized.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
A simple and small mount for a fan on a RAMPS1.4 board. The photos show a small 40mm fan, however the brackets are parametrizable and other fan dimensions (e.g. 50mm) could be used easily. The brackets have a small air guide on one side.
I found some similar brackets, but all of them had too wide legs so they could not be mounted between the pin connectors.
What you need
Please note: All links to Amazon (amzn.to), AliExpress (s.click.aliexpress.com) or marked with * are affiliate links, through which I receive a small commission. Perhaps you would like to support my work by making a purchase.
Parts used (BOM)
2x RAMPS1.4 fan mounts (printed)
1x 40mm fan
4x M3 allen head screws for mounting fan to brackets
4x M3 washers
4x M3 nuts
Tools used
Screwdriver or allen-key suitable for your M3-screws
https://amzn.to/45a8DPQ
Suggested print settings
Rafts: No
Supports: No
Resolution: 0.2mm layer thickness
Infill: 25%
Instructions
Slice model and print two brackets.
Use M3 allen head screws to mount fan on brackets.
Clip brackets onto RAMPS1.4
Enjoy cool steppers 😉