Cereal Container / Box Filament Storage Lid Desiccant Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lid insert for a 4L Plastic Cereal Container to hold desiccant beads.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 500
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Ideal for long-term filament storage without modifying or drilling your container.
QUICK OVERVIEW
Purpose: Threaded desiccant lid insert for upright cereal-box filament storage
Container type: 4 L plastic cereal containers
Orientation: Designed for upright storage (not inverted feeder boxes)
Capacity: Holds approx. 1/8 cup desiccant beads
Seal: Uses the container’s original gasket for an airtight fit
Design: Simple 2-piece threaded locking system
Printing: No supports required for standard version
PROJECT BACKGROUND
This is a threaded lid insert for anyone using 4 L plastic cereal containers to store filament in the upright position.
Most cereal-box dry box designs are built to feed filament directly to a printer, which means flipping the container upside down. There’s absolutely nothing wrong with those designs — but in my case, I’m simply storing filament, not feeding printers from the box.
This insert replaces the original hinged lid with a clean, low-profile threaded desiccant holder that keeps moisture under control while allowing the container to remain upright on a shelf.
DESIGN DETAILS
Fits a round 60 mm opening with the existing gasket left in place
Holds approximately 1/8 cup of desiccant beads
Original hinged lid is removed and replaced by this insert
Two-piece threaded design locks securely into place
The existing gasket provides the airtight seal — no extra parts needed
PRINTING NOTES
Printed examples shown were done in PLA using:
Standard 0.4 mm nozzle
Default slicer settings
Print orientation:
Lid: top down / threads up
Container insert: bottom down / threads up
Supports are NOT required for the standard version
Slower print speeds are recommended for cleaner threads
ALSO INCLUDED
A Creality-branded lid version is included for those who want a brand-matching look
Enable standard supports
Print lid down / threads up so the embossed logo prints cleanly
Suggestions and improvements are always welcome — and as always, pics of your prints are encouraged!
VERSION INFO
v 1.0 - Designed as a simple desiccant-only solution — a hygrometer-ready version may be added in a future update if anybody has a need.
Thanks for looking, and Happy Printing!