Luer Slip Tip Parametric (Fusion)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Includes 1mm, 1.25mm and 1.5 mm tips.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 347
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is a simple parametric Luer slip tip designed in Fusion 360. The tip diameter and length can be adjusted using the Fusion 360 (.f3d) file to fit different use cases.
The Luer slip standard is very widely used, especially for syringes and other small fluid connectors. It is commonly found on syringes across a range of sizes and is one of the most widely recognized connection standards for transferring small amounts of fluid.
I printed mine in PLA, but it should also work with other common materials such as PETG or ABS.
Print settings:
Layer height: 0.2 mm
Material: PLA
Supports: Not required
I recommend printing at least 3 pieces at the same time, or printing it together with another object. If only one is printed by itself, the layer time can be too short, which may cause the small tip to overheat or deform.
This part is intended for non-medical, hobby, testing, or prototyping use only. It should not be used for any health-related, medical, sterile or food-safe application.