IKEA HAVSTA/HEMNES shelf support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement IKEA metal shelf support. For HAVSTA and HEMNES.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 16
- Wydruki
- 2
- Wyświetlenia
- 77
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement shelf support based on the IKEA HAVSTA/HEMNES part.
I tried to make it as accurate as possible — it fits well in my case.
Printing
7–8 perimeters (walls) for a near-solid / 100% solid part
print on the side, with supports
I printed mine in PLA and it’s surprisingly strong, but for better durability I’d recommend ASA or ABS.
Safety / Disclaimer
This is a 3D-printed replacement part. Use it at your own risk. Before regular use, make sure the shelf sits securely and doesn’t wobble or slip. Always test it first with a light load and increase the load gradually.
For safety reasons, don’t use this part for heavy shelves or in places where a falling shelf could hurt someone (e.g. above a bed, a desk, or in a child’s room).
Also note: IKEA sells original metal shelf supports/spare parts in some cases. If you can get the original metal supports, that’s the recommended option as a first choice — this print is mainly meant as a DIY backup/temporary replacement.