scx24 c10/customizable straight chassis links
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for my monster truck build
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
used the ball joint ends and similar geometry to @jeffhengesbach's high clearance lower joints. you can use his if you would like high clearance ones :)
not high clearance on purpose. this is for my monster truck build and high clearance isn't realistic so I just made these. hope you like them and have fun!
as title says, however, to customize them you can go to my onshape file to edit the lengths to whatever you want. just go to sketch 1 (the one that says "edit this sketch to change length"). double click on it. then it'll popup with a rectangle. change the number (double click and type) that corresponds to the length you want (lengths of chassis links are measured eye-to-eye--the center of the one circle to the center of the other). hit enter to save the value you entered, and then hit the green checkmark on the small panel in the top left. everything else will adjust on its own, no other work needed. right-click on the part studio at the bottom that you are currently editing, and then hit "export...". to make everything easier, uncheck the "Export unique parts as individual files". print them and you're done! if my instructions are too bad then I can make a video showing how, if yall want.