1 / 4
2.5" to 3.5" SSD Adapter w/ Sleds for 3u 8x Hard Drive Bay
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix allows you to utilize 2.5" SSDs in the 8 bay setup by RagingRoosevelt.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 603
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (25)Powiązane
This remix allows you to utilize 2.5" SSDs in the 8 bay setup by RagingRoosevelt.
With this, you only need 3 M3 x 6mm screws to secure each drive, which shouldn't be an issue for SSDs. Holes are large enough to allow LTT screwdriver to work.
I printed with Elegoo Rapid PETG on an Elegoo Centauri Carbon. Biqu Cryogrip plate with no brim or supports.
2 walls, 15% rectilinear infill. Total filament usage is 29.83g per sled according to my slicer.
