Filament Spool Bushing for Cardboard Reels (55 mm and 54 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A filament spool bushing for cardboard reels to ensure smooth rotation and reduced friction.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Filament Spool Bushing for Cardboard Reels (55 mm and 54 mm)
A filament spool bushing designed for cardboard spools to ensure smooth rotation and reduced friction when used on a 3D printer spool holder.
Cardboard spools often create more drag than plastic ones; this bushing helps the spool rotate more freely and improves consistent filament feeding.
The bushings are available with outer diameters of 55 mm and 54 mm and are intended to fit standard cardboard filament spools. The 55 mm version fits most spools, but in some cases the 54 mm version provides a better fit.
Two bushings are required per spool — one for each side — to properly support the spool and ensure smooth, balanced rotation.
Ideal for reducing resistance, noise, and uneven filament feed when using cardboard spools on common 3D printer holders.
Note
The same version of this model is also available on Thingiverse. For documentation, printing instructions, updates, and the changelog, visit: https://www.thingiverse.com/thing:7255646
License
Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
You are free to:
Share — copy and redistribute the model in any medium or format
Adapt — remix, transform, and build upon the model
Use commercially
Under the following terms:
Attribution — You must give appropriate credit to the original author
ShareAlike — If you modify the model, you must distribute your contributions under the same license
This model is provided as-is, without warranty. Use at your own risk.