Liczymy pasujące modele…
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
Most users of the Breville Barista Express espresso machine get frustrated when using the built in grinder, as the coffee grinds tends to spill out of the portafilter. This dosing funnel attaches to the 54mm portafilter to provide…
Simple case for the Samsung A54. I have included a fusion360 file. It also includes modifications to fit 2 cards (ID, credit card...) and to hold 2 coins; 1 and 2 euros in size, to unlock shopping carts. I did some modifications to…
UPDATE 12-16-2022: Added support for Stronghold and AMOLEN 250g spools. ---- Eryone spools are a different size (150mm diameter), so I modified the original design in a couple of ways. This should work for any filament spool that is…
I waited for a month for the original author to respond wether there will be a V2 for 54mm portafilters, and then decided to make my own. This is not a scaled model, but a re-computed one. Please follow the original Umikot instructions…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
We’ve teamed up once again with Printables.com for a complex design challenge ! This time, you’ll get to choose from three different modular products to make your own. Cooler Master’s FreeForm 2.0 philosophy is all about giving makers the…
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
This is a 54mm jet drive that can be used for an RC boat. I used two of them for an electric surfboard. I designed these jet pumps because I couldn't find anything that met my needs. I hope they are of use to someone who is looking for a…
This is a quick remix of the dosing funnel by Josh Hartman that fits 54mm portafilters with 3 tabs. Depending on how tight you want the fit, you may need to scale the print to 99% or 98%
Print the model upright so the layer lines are vertical when mounted to the wall for best strength. I printed with PETG but you can probably get away with PLA as the model isn't very heavy.
Please report a portafilter or other equipment that is not fitting, plus its dimensions. The tamper station features: holding the portafilter for preparing the puck (adjustable via vertical screw) storing two bigger 51-54 mm or 58 mm…
The case should be compatible with the original silakka54 and the SMD versions sold in Aliexpress. The case does not use PCB mounting holes. Heatset inserts goes into the frame and MCU cover. I recommend to add few rubber feet under the…
This model is compatible with the lego system.
Yet another electric powered "turbo"... but this one sucks really hard! [>1.0 psi easily] I set about designing a centrifugal compressor with a smaller rotor/shroud clearance that commonly found, in order to achieve high pressures more…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store NOTE: An issue has been identified with the…
This model is compatible with the lego system.
This remix of the original Silakka54 case has the following differences: case bottom is now solid case top has been integrated into the case bottom case sides walls has been reduced by 50% case walls are now shorter and matches the height…
Modification of Deburring Tool Case 154mm (Libraton) - Rugged Box Style to fit NB1100 deburring tool. In this remix you can find part to fit NB1100 deburring tool to fit to original box made by user @Shadow_1242354 . You just need to…
Originally published here: Samsung Galaxy A54 a546 case by tato_713 - Thingiverse Thanks to Johannas3D who helped me testing this case. Some of the models are designed for rigid materials and others for flexible ones. The models materials…
Features No support Minimal filament 5g (54mm) 7g (58mm) Compatibility 54mm (untested) 58mm/58.5mm (tested on Decent Espresso and VST Precision Filter Baskets) Print Settings PrusaSlicer 0.15mm quality with 0.4mm nozzle
Case for a safety transport or storage of an AMD CPU. Perfect then u selling CPUs. TIP: Secure the case with a peace of tape for shipping. Hope u Enjoy
You will need M4x6x5 heat inserts. If you would like to use something else or screw straight into plastic, there is also a .step provided. M4x10 screws are a perfect match for attaching the stepper drivers but make sure the head isn't too…
This model is compatible with the lego system.
Version 4 added 8/13/25 but is untested. This is a simple valve spring compressor tool I designed for the M54/52 cylinder heads. I printed this in Overture PC on a Bambu Lab X1C in draft mode (0.28mm layer height) with 4 perimeters and…
Cardboard filament spools do not unwind easily on a spool holder. Two of these rings reduce the friction. On user request, I added 2 larger versions: Standard is 54mm diameter. This one should fit Larger version with 54.4mm diameter for…
Description Insert for tool made longer (154mm) to fit Libraton tool. This is my first remix so plese let me know if I've done something wrong via coments Assembly You will need six 20 mm long M3 screws to assemble it. The magnet used for…
(Copied from the original listing on Maker World) DF54 true zero indicator that uses the original screw. Tight fit so it might work without the screw as well. Do not mind the reflections in the picture. Printed with High Quality BBL A1…
DM542 stepper motor driver dins rail mount with Solidworks 2016 file This file is to be used with this din rail clip .
This model is compatible with the lego system.
This model is compatible with the lego system.
This 54 pieces brain teaser puzzle is easy to print but hard to solve. Can you build a perfect cube using only the 54 included pieces ? Print settings: Brain Teaser puzzle holder Nozzle: 0.4 Layer height: 0.2mm Infill: 15% Support: no…
A 5x2 Gridfinity tray for the Iwiss SN-2549 crimping tool. Probably also fits: SN-28B SN-58B SN-025 SN-01BM as these seem to use the same chassis. Versions available: Half-height (3u) - the tool sits about 3mm proud of the top of the tray…
How to print. For engine use recommended ASA or ABS any other high heat resist material. Might get away with PET since its off on top of the motor. (still it is your throttle body, be responsible) And test test test. Make sure when you…
Remix of newman13f's model with a wider hole which fits stock 54mm portafilter of Sage/ Breville Bambino/ Bambino Plus. newman13f does not seem to have a printables account though.
Simple tenting platform for Silakka54 keyboard. Works without or with bottom plate.
Deutsche Bundesbahn Guterwagen Gls205 / Gms54 in gauge 1 (1:32). I "borrowed" the roof-shape from the "French Wagon" by dagnall53: https://www.thingiverse.com/thing:2675325 The coupling is a modified version of raby's design:…
This model is compatible with the lego system.
Perfect fitting Smartphone cover for Motorola G54. Print in TPU or similar. Like to see your makes, post it here .. Love my 3D models? If my designs have helped you print something awesome or inspired your next project, consider…
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 54mm…
Simple adapter to snugly fit into JAYO PLA spools and then slide onto AD5X spool holder. Takes JAYO spool with 73mm diameter opening and steps it down to 54mm. Fits onto AD5X very snugly, so I recommend leaving adapter on the spool holder…
I was thrilled by Reven's Portafilter holder for Baratza Encore but I found my portafilter was too small, tweaked the design of the holder piece to fit it. Go get the other parts from their project!
A dosing funnel specifically designed for the WDT (Weiss Distribution Technique) that is compatible with 54mm Breville/Sage portafilters. This funnel captures stray coffee grounds that would otherwise be lost during grinding. Key features…
Compatible with any 54mm basket of Sage/Breville Barista Express, Barista Touch and Barista pro enjoy
Revised all files in April 2026. This is my interpretation in Gauge 1 (1:32) of the Kds 54 / Ucs 908 Silowagon operated by Deutsche Bundesbahn. http://www.dybas.de/dybas/gw/gw_u_9/g908.html…
This was inspired by this design: https://www.thingiverse.com/thing:4671580 I designed it without the tabs on top with an extended tab at the front to catch on the bottom of the portafilter holder on the Breville Smart Grinder Pro. The…
I really do not know who designed this or rather scanned this, but i believe this must be on this site. I don't think Thingiverse has much time left. This is a 1 to 1 replica of the original, it just snaps in place really well. (Altough…
This container is designed to catch the fabric which was cutted off. It fits the W6 454D Overlock. Just open the flap and put the nose on the side of the container into the opening. After closing the flap the container is secured on the…
This model is compatible with the lego system.
The design was inspired from MizzrBear's design. This is not a remix
Everyone who owns this wireless charger from Samsung certainly knows this problem. You finally want to sleep in the evening and put the phone on this charger without looking... And the next morning you realize with fright that the phone…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
This model is compatible with the lego system.
Adjustment kit for the Vanos in BMW engines (M52 and M54) I found the Vanos adjustment measures on BMW forums and made this jig/kit to adjust the Vanos to these parameters. It worked a charm on my engine swapped Z3 who's vanos got out of…
Cans with a 54mm lid diameter typically have a capacity of 330ml to 500ml . The tolerances for the locking mechanism are excellent on my Prusa MK4—the lock fits snugly into the slider and holds nicely. However, personally, I secure…
My grandpa gave me this old Delta 22-540 planer. It had absolutely no chip/dust collection. So I modeled this up to attach to the chip deflector shroud thing and connect to a shop vac to collect the chips. I've included 2 models, one with…
This model is compatible with the lego system.
Printed with PETG, nozzle temp: 240, bed temp: 90, recommend printing with supports so that the axle holes are vertical.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** To complete my overall project of plugging up all…
I increased the inner diameter to 54mm and changed the thread. Thread tolerance = 0.35 mm so calibrate the flow rate beforehand. Material used = ~150 grams Edit: 22.11.2024: Now the whole model can be printed without support. added thread…
WDT (Weiss Distribution Technique) is a method of espresso preparation to evenly distribute coffee grounds in a portafilter to ensure a more even extraction of coffee from the espresso machine. This tool uses several needles spinning in a…
I made it myself it's tested and compatible.
Replaces original holder to suit 54mm portafilter. Designed to fit with a small dosing ring. Grinding directly into the portafilter without using without a dosing ring will probably create a lot of mess. Recommend printing with supports…
This model is compatible with the lego system.
This model is compatible with the lego system.
FREE STL of our Zivko Edge 540. More STLs here: https://dimvilleaircraft.com/product-category/stl-files/?PR
I recommend every hobby barista, especially those who are just starting out, to use a leveling tool. I designed this one for our SAGE Barista Touch. It is based on the original dimensions of the trimming tool from SAGE and fits perfectly…
This is a tamper station inspired by Joe for my Sage/Breville Barista Express machine, which uses a 54mm portafilter. There are two sized a big and a small one.
Remixed to make useful with a Eureka Mignon on a tilted base. It may also be useful for people who want the holder to retain the dosing cup more securely without a tilted base. Have also included a version for different size dosing cup…
This model is compatible with the lego system.
Simple tenting platform for Silakka54 keyboard with case . 5deg, 10deg, 15deg, 20deg, 25deg
Die Maße der einlegeplatte (Siebdruck multiplex) sind B=149mm/L=543mm/H=15mm. Zur befestigung habe ich einfach passende Blechschrauben benutzt. Die 149mm Teile mit Clip und Anschlag sind für die Standard langen Auszugsstangen am Tisch in…
What is this? This is a 3d printed addition for the VEX V5 controllers that allows for drivers to have better control over their robots during a match by allowing them to press buttons on the top of the controller through durable levers…
This model is compatible with the lego system.
This model is compatible with the lego system.
I present to you a 54x44 square cells, orthogonal maze. You have to start from center and the exit is at the bottom. The maze is a little bit hard to solve, but the time to solve it is worth it. The total maze size is 240x200x11mm. There…
glue all parts together and use the wing mount. you might need to sand the enside of motor mount. also use wing holder to glue each tube together. also amke sure to glue the motor mount on the bottom
This model enables you to easily vertically mount your GPU in the AIR 5400 chassis. Do note that there is a small performance hit on the GPU by vertically mounting it (2-4 degrees) as the air ducts lose some effectiveness. However, you…
Yes, the world needed yet another Benchy display rack. There are some nice designs out there…but I wanted to display as many Benchys as I could, in the smallest space possible, on my desk. I did not want to mount anything to the walls, or…
The slim case is excellent but too low for three layer keyboards. The remixed case is higher to make it fit, and it fits well, height-wise. Now Aliexpress sells variants of the Silakka54 that have a slightly bigger PCB on the corner with…
Cover for jst xh2.54 male connector 2 pin fast and economical printing to connect additional accessories to a motherboard for example. Assembly requires : a soldering iron a glue gun 2P connectors :…
Simple wall mount for the Unifi 60W power brick delivered with the Unifi Cloud Gateway Fiber. Works best in PLA due to it's rigidity, requires supports (tree is best) for the clips. Uses 2 3.5mm countersunk screws to fix it to the wall.…
This is my interpretation of a gauge 1 (1:32) Deutsche Bundesbahn PWGHS 54 Güterzugbegleitwagen. Best printed in PETG, with the outside of the walls facing up. 20SEP19: Uploaded improved STL's. Construction: Identical to my previous…
I needed to bolt some stuff to the aluminium extrusion profile I found in the basement. Found out that 4545 is rather exotic/not as popular as 2020/4040, and other tslot nuts doesn't scale linearly for this extrusion, so had to make my…
The holes are printed tapped for an M4 thread. You will need to print one tab for the bracket. It can be found at: https://www.thingiverse.com/thing:3401942 or https://www.prusaprinters.org/prints/8512-din-rail-mounting-tab Category:…
This model is compatible with the lego system.
Everything printable at 0.2mm layer height, you can upscale the model if you want, but i advise to not downscale due to the fact, that it will lose a lot of detail and some supports are already quite hard to remove. Turret is fully…
This is a positioner for the IWISS SN-2549 crimp tool for Molex SL contacts (male and female). The positioner is secured to the tool using a 20mm M4 screw and nut. Replace the existing screw with the new screw while the jaws are closed to…
Printable 3D model. Psyduck Soap Dish. Pokemon inspiration. STL file.
A 7.62x54mmR rimmed rifle cartridge, which was originally designed for the Mosin-Nagant rifle. Category: Sport & Outdoors
This model is compatible with the lego system.
Zero Clearance insert for Metabo KGS 254m You need both part 1 and 2 plus 2x 5x20 mm sylinders to mount. Use original screws to mount
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Anschutz Match 54 Bolt Protector / Sleeve / Case Free version (printed with black PLA in pictures), without end-caps and additional improvements. Premium version (as printed green in pictures) with end-caps and some other small design…
45 degree bracket for eufy E340 Dual Battery Powered video doorbell that uses the existing 54mm #3 screw holes. Print on closed face No support required for some printers. If any, supports painted for recessed rectangles
This model is compatible with the lego system.
54mm Portafilter holder. Holds both Breville and the Normcore bottomless portafilter. Not tested with other brands, though if they are similar shape they will likely work as well! The stand fits low enough on the portafilter that it…
Particularly suitable for games like BattleTech Unscaled hex size is 1.5" peek-to-peek (long diagonal) with a level height of 20mm If you prefer 1.75" peek-to-peek hexes, scale the models by 116% horizontally, but consider only scaling…
This is my 3D-printable hexacopter (drone) frame, designed to sit in roughly the same size niche as the old DJI Flame Wheel F550 kits, but with the ability to easily print and replace anything you break if (when!) a crash happens. If you…
![Display Stand for LEGO Star Wars Microfighters and Polybags [last update 27.05.2025] / 75400 75391 75344](https://media.printables.com/media/prints/427956/images/4197916_10ccaadf-5adf-459c-923a-defcc0d5886b/img_20230702_152357.jpg)
