Minimalistic USB & USB-C Slim Dust Cover Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Precision USB-A & USB-C dust covers. Ultra-slim, minimalistic design to protect ports from lint and debris. No supports.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Minimalistic USB & USB-C Slim Dust Cover Kit
Protect your tech without the bulk. This Minimalist Dust Cover Kit includes precision-engineered protectors for both USB-A and USB-C ports. Designed with a sleek, ultra-slim profile, these covers prevent pocket lint, dust, and debris from entering your laptop, power bank, or smartphone ports while maintaining a flush, clean aesthetic.
Unlike standard bulky silicone plugs, these covers are designed to be low-profile and friction-fit, ensuring they stay securely in place during travel. Whether you are building a "stealth" setup or just want to prolong the life of your hardware, this kit is an essential EDC (Everyday Carry) print.
Key Features:
Dual-Port Support: Includes both USB-A and USB-C designs in a single model.
Ultra-Slim Fit: Designed to sit as flush as possible against the device for a seamless, factory look.
Friction-Lock Design: Precision tolerances ensure a snug fit that won't fall out in your bag but remains easy to remove when needed.
Minimalist Aesthetic: Clean lines with no unnecessary branding—perfect for matching your custom keyboard or laptop.
Technical Specifications & Print Settings
Category | Requirement / Setting |
Material | PLA, PETG, TPU |
Layer Height | 0.1mm - 0.12mm (Essential for precision port fitment) |
Wall Loops | 2 - 3 |
Infill | ANY (There is none anyway) |
Supports | None (Designed to print flat on the build plate) |
Designer Tips:
Material Choice: If printing in PLA or PETG, I recommend a slightly translucent or matte black filament to match your device. If using TPU, the covers will act more like a gasket for a better air-tight seal.
Tolerance Tweak: Because USB ports vary slightly between manufacturers, if the fit is too loose, increase the Outer Wall Flow by 2%. If it's too tight, use XY Hole Compensation at -0.05mm.