40mm Flex Conduit Mounting System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting system for 40mm flex conduit that allows to create clean, industrial looking cabling paths.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
System for creating cable paths with 40mm flex conduit.
All parts print without support.
Boxes I have used are f-tronic NEPTUN NFK18 but any boxes with 32mm holes should work.
Parts include:
Adapters
Straight
Has flange to sit conduit nicely
Conduit can be glued with hot glue
Threaded part fits 32mm electric box holes
Angled - 45°
Conduit can be glued with hot glue
Threaded part fits 32mm electric box holes
Nut
Thread 1mm bigger than adapters to allow for easy threading with printed parts
Clips
Wall
Hole for 4mm screw
Two studs to prevent clip rotation
Desk Bracket
4 holes for M3 bolts
Desk Bracket
IKEA Mittzon Desk Bracket
Fits 3 holes in desk support beam for fastening (tabletop removal required to access)
Has 4 holes for M3 inserts