1 / 1
2020 No Drop Nut for ChaoticLab Voron 2.4 CNC Door Hinges — zdjęcie 1

2020 No Drop Nut for ChaoticLab Voron 2.4 CNC Door Hinges

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2020 No Drop Nut for Chaotic Hinges to avoid twisting doors

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
1
Wyświetlenia
105
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

These ChaoticLab hinges did not fitted well to my extrusion profile, it kind twisted the door leaving a huge gap from the door to the extrusion. This model will replace the M3 T-nut to a M3 brass heat insert (3x4x5mm).

Use ABS or ASA filament with Voron settings. Supports aren't needed.

No, I do not share the design files. Use at your own risk.

Tagi