ZeroG Mercury One Voron Toolhead X Joints
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified X Joints for ZeroG Mercury One.1 to accomodate front rail mounting and Voron toolheads
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 517
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just like the original version, the 2020 X extrusion is moved 2.73 mm (instead of 3 mm) to the back to fix the belt path when using a front rail configuration and a Stealthburner toolhead.
The offset is different from the original mod to better match the Voron X Joints and improve compatibility with the Stealthburner. On a Voron the distance between the idler's axis and the extrusion's midplane is 29.62 mm, this mod also has a 29.62 mm while the original mod has 30.09 mm.
These X joints should be compatible with :
Stealthburner (just like the original model)
Afterburner
Dragonburner
XOL
Archetype
Any other Voron compatible toolhead
Disclaimer
These parts weren't tested in real life, I initially did this modification for an other mod and thought it would be nice to share. I only changed the position of the gantry in a similar way to the original file. If there's anything wrong about it please mention it in the comments.
Printing settings
Use ZeroG printing settings.
Check out my other ZeroG Mercury1 mods