"Toasty Crotch/Knees/Legs" Workbench Mount | Amazon Basics Heater x 4040
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Under-desk 4040 extrusion mount for Amazon Basics Heater or similar-sized heaters. Adjustable height for perfect warmth.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
The source files (SOLIDWORKS + STEP) are at: https://assista3d.com/marketplace/d621a911-56e5-4325-8101-d0a52051bab3
Description
If you work in a garage or a workshop in the winter, you know it gets cold. This mount solves the "freezing legs" problem by lifting your heater off the dusty floor and mounting it directly to your table leg.
This was designed specifically for the Amazon Basics Ceramic Space Heater (Silver/Black model). It holds the heater securely while allowing access to the top controls. It should fit any size heater similar.
In the summer you can run your heater in fan mode or use a standard fan.
Hardware Needed (Bill of Materials)
2x M5 or M6 Socket Head Cap Screws (Length: 16mm-20mm)
2x M5 or M6 Washers
2x T-Nuts
Print Settings
100% infill. I used Deeplee PLA Rapid, standard settings. Any filament will work. 3+ Perimeters. Small enough to print on a prusa mini.
Modification
.SLDPRT is included if you wish to edit the part. Creative Commons - Attribution (CC BY) or Attribution-NonCommercial (CC BY-NC).
This allows people to download it for free but protects against other companies taking the design and selling it without asking.