Modular Knife Block Side Magnet (16× 10×2 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side-mounted magnet attachment for the Ultimate Modular Knife Block using 10×2 mm magnets.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modular Knife Block Side Magnet (16×10×2 mm)
This model is a side-mounted magnet module designed for the Ultimate Modular Knife Block. It allows knives to be stored magnetically on the side of the block, positioned centrally for balanced and easy access.
The magnet module consists of two parts: a housing and a rear inlay.
The housing forms the visible outer body and contains the magnet cavities. It is designed to hold 16 magnets (10×2 mm), which are glued directly into the housing using super glue.
The inlay is mounted on the back side of the housing and fully covers the magnets from the rear. Once installed on the knife block, the inlay is not visible, as it faces the block itself. Its purpose is to secure the magnets and create a clean, closed backside.
The module is intended to be mounted on the side of the knife block.
This model is uploaded as a remix to maintain a clear connection to the original knife block project. The side magnet itself, however, was fully designed from scratch, with only the general idea of a side-mounted magnet inspired by the original model.
All parts are uploaded already in the correct print orientation and can be sliced and printed without any manual rotation.Modular
Print Settings
Material: PLA or PETG
Layer height: 0.2 mm