8 mm Diameter Boom to Fuselage Bulkhead Attachment Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Contains a bushing and clamp for attaching an 8 mm diameter boom to a 2 mm thick fuselage bulkhead
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
General Information
This model contains components for a fuselage of a radio controlled (R/C) aircraft. The included components are a clamp and bushing for attaching a tail boom or other tubular structure to a bulkhead. The boom diameter is 8 mm and the bulkhead thickness is 2 mm.
Additional components, such as nose and tail fairings, wing attachment structures, etc will be provided in separate models and linked. The figure below is an exploded view of components of this system.
Detailed Component Descriptions
Single Clamp
This piece is a clamp that assembles over the Bushing. On one side there is a hole for a heat press threaded insert (4 mm threads) and on the other side a hole for a 4 mm hex cap screw.
Bushing
This piece inserts into the bulkhead, with a key to control rotational orientation and features that capture the Clamp when it is assembled onto it.
Assembly
The Bushing has an outer interface shape with the dimensions shown below:
This is an example of a 2 mm thick bulkhead designed to accept the Bushing component
Bushing assembled into the bulkhead
Bushing and clamp assembly. Note that the larger hole accommodates a heat press threaded insert.
Clamp, Bushing, Bulkhead, and tail boom installed on the aircraft.
Printing Recommendations
Both components are designed to print in the orientation provided and should be printed with multiple perimeters. Print the Bushing with 100% infill (or sufficient perimeters to ensure 100% infill). Print the clamp with a high infill percentage such as 50%.
The Modular R/C Aircraft Collection
This collection is a set of models for R/C aircraft that I have designed to be generally interoperable and support design and fabrication of a wide range of aircraft configurations:
https://www.printables.com/@Uenbzsto/collections/2458682
Related FD1 Models
These models are part of the FD1 fuselage structure system.
Support This Project
If you liked this model, please consider buying me a coffee!
