milwaukee BIC Lighter case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a BIC lighter sleeve
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 161
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Design Concept
The Milwaukee Bic Lighter case features a sturdy design with a dynamic Milwaukee logo, combining functionality with a stylish brand representation.
Purpose
This design is intended to offer both protection and a personalized look for your standard Bic lighter, making it easier to grip and use.
Printing Suggestions
Use PLA or ABS plastic for durability. Print with a layer height of 0.2mm and ensure good adhesion to the print bed to avoid warping.
Assembly Instructions
Simply slide a standard Bic lighter into the case.
If you do not have multi-color capabilities you can always print in all white and use a red paint pen or marker to color the logo yourself.
Note: if fit is loose try sizing down by .15% depending on your filament used and shrinkage results may vary